Before. Before THE PARTY that is!!
Amidst a lovely light spring rain/sleet/snow we assembled the second of the two main sections, which astute readers will remember is a 30-degree segment. After a few late nights of hurried T-Nut installation, the big day arrived and my
"I'm not sure this is going to work"
"That hasn't stopped me yet."
I have a lot of regrets
This is how we party in Hokkaido
You can see here, as in the first picture, the unnatural blue glow of my garage. I picked up a string of Christmas lights on the cheap to provide lighting inside the garage at night, figuring the soft glow would serve to illuminate the wall without causing issues with shadows, glare, or excess heat generation. It works quite well, although I wouldn't mind a bit of heat right now. The blue glow pulsing out under the door also serves to keep curious children away, but the tradeoff is that it attracts curious ravers.
Then I had to get behind the wall to secure everything.
Who likes spiders???
Welcome to... the Netherworld.
Here I am behind the wall, taking a selfie while waiting for more screws. I had to climb up the back to screw the supports into the top beams of the A-frame. You can see the supporting beams of the garage itself in this picture, but the wall isn't attached to them at all- I didn't trust the structure of the garage enough. You can also see the gap I was planning on squeezing through to get out. Alas, it wasn't meant to be.
After securing everything (for now) I got back out and we were done. The 30 degree section will need more beams supporting it, but since I can get behind the wall at will I can do that any time. And the result...
Both sections of the wall, loud and proud. I put a few holds up on the left side, for testing purposes only. I promise I didn't climb on anything before the wall was properly supported.
Birth in Reverse
Here's the gap between the two sections. Once everything is squared away and I don't need to get behind the wall any more, I'll put a small section of plywood here as a transition. This will provide for cool arete moves and let me use some of the terrible slopers I have that would be unusable anywhere else.
Nothing sadder than Christmas lights in daylight
Here you can see the gap between the top of the 30 and the A-frame crossbeam. After adding a few more support 2x6s in here, I'll put a short roof section here. This roof section will actually be slightly MORE than horizontal, with a slight angle down from the top of the 30. This should provide some interesting potential for underclings and the like.
And there you have it. These two pieces form the main bulk of Kuraimu V4, and I'm excited as hell to have them up. The next step, after finishing the transition and mini-roof, will be to add in the proper roof section- more on that later.
Thanks for reading, and stay tuned next time for A Very Special Edition of Fantasy Gyms. Stay loose!